Motul RBF 600 factory line brake fluid is a 100% synthetic brake fluid particularly suitable for the demands of racing and for those who require a high-performance brake fluid. The high-performance DOT 4 brake fluid is particularly suitable for race application and exceeds the DOT 5.1 and DOT 3 standards. The very high dry and wet boiling point of RBF 600 is far better than Dot 5.1 brake fluids and enables effective braking even under extreme conditions. RBF 600 brake fluid is suitable for all types of hydraulic actuated brake and clutch systems requiring a non-silicone fluid.

• Dry Boiling Point - 312 degrees Celsius
• Wet boiling point - 216 degrees Celsius
• 500ml 

Extreme High-Performance polyglycol brake fluid. Far exceeds the standards of DOT 4. Each bottle is filled with Nitrogen, increasing shelf life and eliminating contamination while factory sealed. Extremely high dry boiling point 594°F (312°C) helps prevent vapour lock and brake fade during hard use, with excellent recovery time. Wet boiling point 401°F (205°C).

AVAILABILITY

Stock Item

RBF660 is a 100% synthetic racing brake fluid from Motul which meets DOT 4 specifications. It features a very high boiling point which makes it suitable for use in the most extreme racing conditions including heavy and powerful race cars using Carbon or Ceramic brakes.

• Boiling point - 325 Deg C (617 Deg F)
• 500ml Bottle

High-Performance brake fluid with a very high dry boiling point of 617°F (325°C) and wet boiling point of 400°F (204°C). For all types of hydraulic brake and clutch actuators requiring non-silicone synthetic fluid. Specially designed to resist extreme high temperature generated by racing brakes (carbon and ceramic) only allowing a minimal air entrance for brake cooling.

AVAILABILITY

Stock Item

RBF700 is a 100% synthetic racing brake fluid from Motul which meets DOT 4 specifications. It features a very high boiling point which makes it suitable for use in the most extreme racing conditions including heavy and powerful race cars using Carbon or Ceramic brakes.

• Boiling point - 336 Deg C (637 Deg F)
• 500ml Bottle

High-Performance brake fluid with a very high dry boiling point of 637°F (336°C) and wet boiling point of 401°F (205°C). For all types of hydraulic brake and clutch actuators requiring non-silicone synthetic fluid. Specially designed to resist extreme high temperature generated by racing brakes (carbon and ceramic) only allowing a minimal air entrance for brake cooling.

AVAILABILITY

Stock Item

A high-temperature brake fluid with an extremely high dry boiling point of at least 310°C, providing exceptional resistance to vapor locking and good compressibility for improved brake feel.

Brake fluids play a key role in driver experience and vehicle feedback. The Millers Oils motorsport brake fluids maintain their viscosity even at high temperatures and are robust against water absorption to ensure consistent performance.

TECH SPECS

• Dry boiling point of above 310°C in comparison to the 230°C required for standard DOT 4 fluids
• Has the capability to perform at the high braking temperatures found under arduous racing conditions
• Robust against water absorption, improving resistance to vapour lock
• Compatible with DOT 3 & 5.1 brake fluids
• Equilibrium Reflux Boiling Point: Above 310°C
• Wet Equilibrium Boiling Point: Above 194°C
• FMVSS 116: DOT 4
• SAE Viscosity Grade: J1703, J1704
• 500ML

COMPATIBLE VEHICLES

• Universal
  

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire. 

AVAILABILITY

In-stock

Allow 1-3 days for dispatch

On every mile of every race track, the importance of high-performance precision braking control has been proven. Total feel and response give you the confidence you need on the road. The difference between an average driver and a great driver is those who can control speed and those who cannot. Speed is nothing without control and it's a very fine line - Which is why HEL Performance only supplies very fine lines.

Each Dream Performance brake line kit is assembled in-house from the finest quality stainless steel fittings swaged directly to hard drawn tensile stainless steel braided hose.

With our extensive automotive listings, the complete kit will be manufactured to exact specifications, guaranteeing the look, the quality, and the performance you demand.

Dream Brake line kits eliminate that 'spongy' feeling often found with rubber hoses under extreme braking conditions - the time when performance is needed the most. By replacing the original rubber hoses with our complete system you will remove this sponginess and your braking will deliver new levels of precision.

Don't risk using inferior brake lines when you can trust us to improve braking reliability and performance - We use stainless steel in our lines and our fittings. Most competitors use zinc plated fittings which are at risk of corrosion.

Brake lines Tested through Time Attack Racing in 2019 and helped us Win the season without a flaw! 

FMVSS-106 Certified for Worldwide Use

To be road legal, brake hoses must comply with the strict criteria and requirements of FMVSS-106. Set out by the Federal Motor Vehicle Safety Standards, these criteria and requirements are used by:

• DOT (United States of America)
• NHTSA (United States of America)
• ADR (Australia)
• LTSA (New Zealand)
• IDR (Israel)
• MOT (Europe)

Dream Automotive is registered under HEL Performance products and is fully certified and registered with all the above organizations. That means you can use them anywhere in the world with utmost confidence.

TECH SPECS

• Direct OEM Fit

WHAT'S IN THE BOX

• Stainless Steel Braided Brake Lines (4)
• Stainless Steel Banjo Bolts
• Copper Crush Washers 
• Instruction Leaflet
• Lifetime Warranty

Lines: 4

• Smoother & Stronger Braking
• Eliminate That Spongy Pedal Feeling
• Sharper and More Responsive Braking
• More Reliable Braking System
• Race Proven Technology
• Lifetime Warranty

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire. Please contact us for details.

AVAILABILITY

HEL Performance have pulled out all the stops when developing their carbon fibre brake pad shims. They've used the finest carbon fibre, combined with an exclusive resin which is non-combustible and thermally resistant to temperatures over 400°C (752°F). This special resin cures an attractive yellow or orange depending on the batch.

These don't just look the part though: initial testing carried out by a professional racing driver in various road and track conditions showed a huge average temperature drop of 49°C (120.2°F) on the front calipers.

HEL carbon fibre shims come in at a super-lightweight 3.5 grams per shim, compared to weighty titanium which are a typical 17 grams per shim. That's a dramatic 79% weight saving.

That's not the only comparison which makes titanium inferior though: carbon fibre also has a much lower heat conduction compared to titanium (1W/mK compared to 22W/mK for titanium and 65W/mK for steel). Anything that helps reduce the temperature and increase efficiency of brake components is a good thing, especially as caliper seals are at risk of being damaged when they get too hot.

Installing these carbon fibre brake pad shims will certainly inspire confidence that when you brake aggressively, all the components are being kept cool and working at their best.

You can also re-use the shims when changing pads, as long as they're in a good condition.

COMPATIBLE VEHICLES

• Honda Civic Type R | FK2 K20C1 2.0T | 2015+
• Honda Civic Type R | FK8 K20C1 2.0T | 2017-2022
• Honda Civic Type R | FL5 K20C1 2.0T | 2022+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.

AVAILABILITY

 Great heat management upgrade to improve braking performance for track and race applications. Paragon titanium pad shims are made of high quality Grade 5 titanium (6AL-4V / ASTM B348). Fits between the brake pads and callipers, and can act as an effective thermal barrier due to the significantly lower thermal conductivity of titanium.

TECH SPECS

• Improved safety by help preventing brake fade and failure
• Extend the life of brake components and lower long term maintenance cost
• Prevent boiled fluid/soft pedal
• Material: Grade 5 titanium (6AL-4V / ASTM B348)
• Thickness: 0.5mm (0.02")
• Work with stock calipers and OEM/aftermarket brake pads
• Set of 4 (axle set) FRONT ONLY

COMPATIBLE VEHICLES

• Honda Civic Type R | FK2 K20C1 2.0T | 2015-2016
• Honda Civic Type R | FK8 K20C1 2.0T | 2017-2021
• Honda Civic Type R | FL5 K20C1 2.0T | 2023+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.

AVAILABILITY

5-15 Days

Subject to the Supplier's availability

The Girodisc solution to help prevent fluid boiling is to use a thin titanium shim placed between the pad back and the pistons, to keep the braking heat from transferring into the pistons and fluid. Here is a comparison of materials and their relative thermal conductivity ratings:

Titanium 6AL-4V 6.7 W/mk Steel 52 W/mk Aluminum 130 W/mk

You can see that Titanium will transfer far less heat than steel and especially aluminum. For cars that are going to see hard or multiple track days, these shims are cheap protection from losing the pedal due to boiling at the wrong time and making the day very expensive.

Water jet cut to the exact size, no cutting, grinding, or swearing involved.

WHAT'S IN THE BOX

• 4x pieces

COMPATIBLE VEHICLES

• Honda Civic Type R | FK2 2.0T K20C1 | 2015-2016
• Honda Civic Type R | FK8 2.0T K20C1 | 2017+
  

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire. Contact us for more information.

AVAILABILITY

DESCRIPTION

Dream Automotive Drilled Performance Front and Rear Brake Discs are ideal for performance road cars where the standard discs are suffering from heavy use, high temperatures, and unstable braking performance.

The discs are made from premium quality G3500 material and machined to exacting standards. The disc has been designed to pull cool air under the pad surface and help disc cooling. 

These discs have an anodized finish for corrosion protection on non-brake areas.

Rear FK8 Discs CLICK HERE

Rear FK2 Discs CLICK HERE

TECH SPECS

• High-performance Drilled brake disc
• G3500 Material (not made from inferior castings)
• Resilient to high temperature
• Long-lasting
• Anti-Corrosion coating

WHAT'S IN THE BOX

• 2x Front Disc
  

COMPATIBLE VEHICLES

• Honda Civic Type R | FK2 2.0T K20C1 | 2015-2016
• Honda Civic Type R | FK8 2.0T K20C1 | 2017+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton.

Contact us for more information

AVAILABILITY

IN STOCK - Allow 2-3 days for dispatch

Sold as a pair

Genuine Honda front brake discs 

Honda recommends replacing the brake disc screws when changing the discs. 

Sold as a pair. 

Lead time: 2 days

This is for a pair of genuine Honda discs. Maintain your car just as Honda intended. As with all genuine Honda parts expect perfect fit and performance every time

WHAT'S IN THE BOX 

You will receive 2x Genuine Honda Civic Type-R FK8  Front Brake Discs (2020 Onwards) – Brake Discs for both wheels on the front of the car

COMPATIBLE VEHICLES

• Honda Civic Type R | FK2 2.0T K20C1 | 2015-2016
• Honda Civic Type R | FK8 2.0T K20C1 | 2017-2021
• Honda Civic Type R | FL5 2.0T K20C1 | 2023+

AVAILABILITY

In Stock

The Pro 5000 R calipers from AP Racing draw on all of the design experience from all areas of motorsport and feature a forged design which includes the latest technology from AP Racing's pioneering asymmetrical design concept. Offered as an entry-level option alongside the already proven Pro 5000+ range of calipers, the Pro 5000 R range includes 7 different caliper variants which cover both 4 and 6 piston arrangements. Each caliper option is radially mounted and are designed to be used with full depth brake pads.

AP Racing Pro 5000 R brake kit is designed and tested specifically for track day enthusiasts and for drivers who demand the utmost performance from their cars. These kits offer superior performance for both normal driving and demanding track day sessions.

• DS2500 (Fast Road/ Light Track) - Although we always recommend using a dedicated race pad for the track, the DS2500 is one of the best hybrid street/track pads on the market. It features the moderately high bite and solid fade resistance of a track pad, with the relatively low dust and noise levels of a street pad. When used as a street pad, it can produce some squeal on certain vehicle platforms. During aggressive driving the DS2500 is known for its flat torque curve, which means as temperatures go up, the response through the brake pedal remains consistent.

• Pagid RSL29 Brake Pads offer a medium average friction, consistent in-stop behaviour with good pedal feedback, progressive release characteristics, exceptional disc life, and low thermal conductivity. Pagid RSL29 Brake Pads have an outstanding wear rate with an initial bite and torque. making them ideal for use in shorter sprint races.

COMPATIBLE VEHICLES

• Honda Civic Type R | FK2 2.0T K20C1 | 2015-2016
• Honda Civic Type R | FK8 2.0T K20C1 | 2017-2021
• Honda Civic Type R | FL5 2.0T K20C1 | 2022+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton.

Contact us for more information

AVAILABILITY

3-10 Days. Certain Disc groove finish may take longer

Sold as a pair.

Paragon brake kits provide superior braking performance and come complete with every component required to upgrade your brake system. Developed with performance, quality, and longevity in mind, only the finest materials/components were used to ensure the brake kit performs and lasts under both street and track conditions. Alcon's experience in top-level motorsport including NASCAR, F1, and WRC further enhanced the exceptional performance of this brake kit.

Calipers

• Lightweight single-piece aluminium Mono-bloc design for optimum strength
• Staggered piston bore sizes for improved brake balance and even pad wear
• High stiffness (firm pedal)
• Pin-mounted pads provide low threshold pressure and minimize unwanted noises 
• Features dust seals to improve durability and protection against debris/road salt

Rotors

• Floating 2-piece design allows thermal expansion of the rotor while minimizing deformation and ensuring the rotor is self-centred with the pads
• Superior braking and cooling efficiency
• Features directional ventilation vanes to create suction, turbulence, and guides cool air through the rotor for improved heat dissipation and increased resistance to cracking
• Made of CM-250 special formulated high carbon alloy cast iron. Allows for an optimal bite, thermal characteristics, high-temperature strength, and durability
• Heat treated to release stress in the rotor to avoid deformation and vibration
• State-of-the-art CBN surface machining to ensure better break-in with new brake pads
• Excellent thermal capacity to minimize brake fade

Curved Directional Ventilation Vanes

Features 48 directional ventilation vanes to create suction and turbulence, and guide cool air through the rotor to achieve better heat dissipation and increased resistance to cracking under harsh track conditions. Each rotor is left or right-side specific, and the ventilation vanes are optimized to spin in a particular direction to pump the maximum amount of cool air through the rotor. This design allows the rotor to run up to 30% cooler than O.E. rotors and increases cooling efficiency by up to 30% over standard 1-piece units. Brake fade and judder are minimized during extended sessions. This means the brake system can withstand heavier track usage and provide consistent braking performance lap after lap.

Slotted Friction Face

Slotted rotor face pattern improves brake consistency by constantly cleaning the contact surface and dissipate heat generated, and gases released when the pads come into contact with the rotors. Slotted rotors have a superior advantage over blank rotors in wet or rainy conditions by preventing water films to form between the brake pad and rotor surface.

Aluminium Hats

• CNC machined from lightweight 6061-T6 aerospace-grade aluminium
• Unsprung weight reduction
• High strength and durability
• Black/hard anodized to increase resistance to wear and corrosion

Floating Bobbins & Mounting System

Utilizes T-Bobbin rotor to hat mounting system to allow "float" in both radial and axial directions, and minimize brake judder. The high-quality stainless steel hardware is corrosion resistant which allows secure mounting, and smooth expansion and contraction throughout heat cycles. Anti-wear clips (McLaren spring clips) are utilized to slightly pre-load the rotor assembly and minimize rattling noise.

Caliper Mounting Brackets

CNC machined caliper mounting brackets to ensure superior strength, durability, and secure mounting of calipers to knuckles.

Paragon Brake Pads

• Manufactured by Winmax Japan
• Superior stopping power and modulation
• High fade resistance
• Consistent performance under high-temperature conditions
• Compounds available for street, street/track, and dedicated track applications

Goodridge Stainless Steel Braided Brake Lines

• Superior durability. Abrasion and corrosion resistant
• Allows a more responsive and firmer pedal feel
• DOT / TÜV certified

OEM Fitment & Functionality

• Direct bolt-on without any modifications
• Properly sized piston and pad volume. Designed to work flawlessly with OEM ABS and brake master cylinder while maintaining proper brake bias
• Compatible with OEM rear brakes

TECH SPECS

• Features Alcon CAR97 Monobloc 6 piston calipers
• Paragon floating 2-piece rotors, with directional ventilation vanes for optimal cooling performance. Runs up to 30% cooler than O.E. rotors
• Direct bolt-on without any modifications. Designed to work flawlessly with OEM ABS and brake master cylinder. Compatible with OEM rear brakes
• Designed to provide shorter brake distance and less brake fade, while offering optimum bite, better modulation, thermal stability, and durability
• Low Noise, vibration, and harshness (NVH). Suitable for daily driven vehicles
• Recommended usage: Street performance / Track
• Rotor to hat mounting system: Floating T-Bobbin (12 bolt)
• Complete pre-assembled axle set

WHAT'S IN THE BOX

• One pair of Alcon CAR97 Monobloc 6 piston callipers
• One pair of Paragon 2-piece rotor assemblies with black/hard anodized 6061-T6 aerospace-grade aluminium hats, stainless steel bobbins, and anti-rattle clips 
• One set of Paragon P2 “Sport Comfort” brake pads (manufactured by Winmax Japan, other compounds available at additional cost)
• One pair of calliper mounting brackets and all necessary hardware
• One pair of Goodridge DOT-approved stainless steel braided brake lines
• Detailed installation manual

COMPATIBLE VEHICLES

• Honda Civic Type R | FK8 K20C1 2.0T | 2017-2020
• Honda Civic Type R | FL5 K20C1 2.0T | 2023

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.

AVAILABILITY

5-15 Days

Subject to the Supplier's availability

Paragon Track Performance Big Brake Kits offer superior braking performance specifically designed for track day enthusiasts. Come complete with every component required to upgrade your brake system. Developed with performance, quality, and longevity in mind, only the finest materials/components were used to ensure the brake kits to perform and last under both street and track conditions.

TECH SPECS

• Features Paragon PA015 / PA035 6 piston callipers
• Fully-floating 2-piece rotors, with directional ventilation vanes for optimal cooling performance. Runs up to 30% cooler than O.E. rotors
• Hard anodized callipers and rotor hats for increased resistance to wear and discoloration under extreme track conditions
• Piston sizes are optimized for each application. Designed to work flawlessly with OEM ABS and brake master cylinder. Compatible with OEM rear brakes
• Confidence-inspiring heat resistance during extended sessions. Optimum bite, modulation characteristics, thermal stability, and durability
• Recommended usage: Street / Track
• Complete pre-assembled axle set

WHAT'S IN THE BOX

• One pair of Paragon PA015 / PA035 6 piston callipers
• One pair of Paragon fully-floating 2-piece rotor assemblies with hard anodized 6061-T6 aerospace grade aluminium hats, stainless steel bobbins, and anti-rattle clips
• One set of Paragon P3 “Street/Track” semi-metallic brake pads (manufactured by Winmax Japan, other compounds available at additional cost)
• One pair of calliper mounting brackets and all necessary hardware
• One pair of Goodridge DOT-approved stainless steel braided brake lines
• One set of calliper anti-rattle clips
• Detailed installation manual

COMPATIBLE VEHICLES

• Honda Civic Type R | FK8 K20C1 2.0T | 2017+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.

AVAILABILITY

Lead Time Varies

DESCRIPTION

Brembo's GT systems are designed and tested specifically for track day enthusiasts and for drivers who demand the utmost performance from their cars. These kits offer superlative performance for both normal driving and demanding track day sessions. 

The heart of the kit consists of monoblock calipers machined from a single billet of cast aluminium, which ensure outstanding rigidity and minimised deformation. The discs supplied in the kit feature an exclusive venting system that improves cooling capacity and increases resistance to cracking caused by thermal shock by over 40%. Cross-drilled and slotted finishes are designed and executed with meticulous precision. These holes or slots in the braking surface help dissipate heat and eliminate brake dust and gases.

Type III brake discs have a motorsport developed face with an emphasis on a high initial response while maintaining a smooth pedal release.

• Benefit: The highest overall braking confidence, control and allows the driver to spend less time on the brake pedal. When chasing the fastest lap time, less time on the brake pedal typically leads to a quicker lap time. 
• Drawback: Any disc with an aggressive face type like the Type III will have a higher chance to mechanically abrade the pad and disc surface leading to quicker or uneven pad wear. However, this really depends on variables such as car setup or track layout.

Slotted brake discs put an emphasis on stable brake feel and improve resilience against thermal cracking.

• Benefit: Stable braking feel at all temperatures, low disc wear, and continuously refreshing the braking surface for optimum performance.
• Drawback: They have the lowest “initial response” or “bite” compared to cross-drilled or Type III discs.

Cross-drilled brake discs are suitable for a wide range of applications, operating temperatures and driving environments (especially wet weather).

• Benefit: They offer the highest initial response of all the available disc face types, while continuously refreshing the braking surface and being also typically a bit lighter.
• Drawback: Cross-drilled discs are generally more prone to heat checking and thermal cracking if used consistently at extremely high temperatures. This, however, really depends on the track, driver, and chassis setup.

TECH SPECS

• 6 piston cast monobloc radial mount calipers with inner pressure seals & OEM approved dust boots.
• 380mm x 32mm advanced high carbon alloy 2-piece discs (Type III, slotted or cross-drilled)
• Proprietary Brembo stainless steel braided brake lines by Goodridge.
• Brembo engineered CNC billet caliper adapters & mounting hardware.

WHAT'S IN THE BOX

• Calipers (2)
• Discs (2)
• TÜV/DOT homologated metal-braided hoses
• CNC billet caliper adapters & mounting hardware

COMPATIBLE VEHICLES

• Honda Civic Type R | FK2 2.0T K20C1 | 2015-2016
• Honda Civic Type R | FK8 2.0T K20C1 | 2017+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire. Here are the important things you need to know:

• Fitting Cost - 
• Fitting Time - 
• Required Additional Items/Services - No additional items or services needed.
• Dream Automotive Recommends - No additional recommendations.

AVAILABILITY

4 Weeks

• PRICE PER AXLE SET (incl. LH and RH disc)
• Engineered, manufactured and run-out tested at EBC's headquarters in Northampton, UK
• Sold as a simple bolt-on 2-piece floating disc upgrade for vehicles with 1-piece cast iron discs fitted as standard (no modification is required to the vehicle to fit 2-piece floating conversion, the EBC disc is a direct replacement to the original disc)
• 48 directionally curved and handed vanes allow effective heat dissipation, resulting in lower operating temperatures that help delay brake fade
• Friction rings cast from G3500 metallurgy with a high copper/high carbon content
• Reduced weight compare to OE discs

 When developing these brake discs, the mission set to EBC Brakes Racing was to engineer one of the highest quality 2-piece brake disc on today's marketplace, at any price point. Consequently, these discs are manufactured from the finest materials and take advantage of state-of-the-art manufacturing techniques, achieving a brake disc of exceptionally high quality.

All outer friction rings are cast from a high-copper, high-carbon G3500 disc alloy giving them a high resistance to wear and cracking, even when used on track or for racing. The cast iron outer ring ‘floats’ on EBC's patented SD-Drive technology bobbins, allowing the friction ring to expand and contract freely by up to 3mm when subjected to the extreme heat generated from hard braking.

The bells are precision machined from aerospace grade aluminium then hard anodised for great looks and excellent durability.

All bobbins are machined from a single piece of stainless steel, preventing unsightly corrosion and ensuring the outer ring continues to float freely, even after years of exposure to road elements. EBC Racing's 2-piece floating discs offer a low maintenance solution that is at home on both the public roads and the race track. Each bobbin location also features an anti-rattle spring clip, meaning these discs are totally silent in operation and do not have the ‘off brake disc rattle’ that is common with many other ‘full race’ 2-piece disc systems.

Upgrading from a 1-piece disc to a 2-piece floating disc will shave crucial kilograms off your vehicles un-sprung rotational mass, providing a noticeable improvement in corner entry turn in, tyre road holding, fuel economy and increasing the BHP at the wheels. Additionally, when the cast iron friction ring becomes worn after a period of use, the outer ring can be replaced independently of the other disc components, allowing the centre hub and stainless bobbins to be re-used which significantly reduces long term running costs.

• The fully floating disc allows for the friction ring to grow independently of the hub dramatically increasing stopping performance and service life.
• Our disc will be using stainless steel bobbins and nuts and this will ensure that the bobbins can not corrode in the slots in the disc ring which is a problem common with many other floating discs as the floating function of the disc can lock up with corrosion
• Each of our high performance 2 piece disc rings will be cast out of a ‘G3500’ disc alloy this is constructed with a high carbon and copper content and is the highest grade of casting alloy available.
• By using the ‘G3500’ disc alloy this gives us greater durability and a higher thermal conductivity compared to all other lower quality disc alloys.
• Each disc will have 48 curved vanes and most importantly will be handed to improve cooling efficiency, unlike many OEM discs these days where the curved vanes run in the wrong direction on one side of the car
• The discs are all centre split castings and this gives a more balanced casting compared to a moulded out casting. This means that the disc is less prone to heat distortion and failure.
• Part of our testing procedure we run the disc through the new industry standard which is called the R90 disc test. To give you an idea about the test it involves running the vehicle up to V-max and doing 2 stops one after the other for 150 cycles.  To give you an idea of how tough this test is we have found generally a OEM disc would only get halfway through this test before failing. Our disc has gone through 2 of these tests with no heat surface crazing or cracking. This demonstrates that our disc can withstand the harshest of track use.  

COMPATIBLE VEHICLES

• Honda Civic Type R | FK2 2.0T K20C1 | 2015-2016
• Honda Civic Type R | FK8 2.0T K20C1 | 2017+
  

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire. Contact us for more information.

AVAILABILITY

3-15 DAYS

Kit contains a pair of fully-floating 2-piece brake discs and one set of track-focused Bluestuff brake pads.

WHAT'S IN THE BOX

• 2X Front Disc
• 2x Front Brake Pads

COMPATIBLE VEHICLES

• Honda Civic Type R | FK2 2.0T K20C1 | 2015-2016
• Honda Civic Type R | FK8 2.0T K20C1 | 2017+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.

AVAILABILITY

1-5 DAYS

SAVE 50% off the price of the front & rear pads when buying an EBC pad + 2pc disc kit with a swept groove rear disc. EBC's

WHAT'S IN THE BOX

• 2x Front 2pc Disc set and RP-1 Race pads
  
• 2x Swept grooved rear discs and Bluestuff rear pads

COMPATIBLE VEHICLES

• Honda Civic Type R | FK8 2.0T K20C1 | 2017+
• Honda Civic Type R | FK2 2.0T K20C1 | 2015-2016

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.

AVAILABILITY

PLEASE CHECK FOR REAR PARTS AVAILABILITY

SAVE 50% off the price of the front & rear pads when buying an EBC pad + 2pc disc kit with a swept groove rear disc. EBC's

WHAT'S IN THE BOX

• 2x Front 2pc Disc set and RP-X Race pads
  
• 2x Swept grooved rear discs and Bluestuff rear pads

COMPATIBLE VEHICLES

• Honda Civic Type R | FK8 2.0T K20C1 | 2017+
• Honda Civic Type R | FK2 2.0T K20C1 | 2015-2016

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.

AVAILABILITY

PLEASE CHECK FOR REAR PARTS AVAILABILITY

SAVE 50% off the price of the front & rear pads when buying an EBC pad + 2pc disc kit with a swept groove rear disc. EBC's fully-floating 2-piece brake discs combined with our high-performance Yellowstuff pads represent the ultimate braking upgrade for high-powered vehicles driven fast on-road or participating in the occasional track day. EBC's famous Yellowstuff material has a high cold friction level, boasts excellent pedal 'feel', and exhibits superior fade resistance compared to OEM parts. Yellowstuff pads offer a depth of precision and control most other brake pads could only dream of, yet they achieve this high level of performance without sacrifices in noise level or wheel dusting. No wonder Yellowstuff is one of the most popular performance road pad choices among driving enthusiasts the world over. EBC racings 2pc fully-floating brake discs are engineered from the finest materials without compromise, resulting in one of the highest quality 2-piece brake discs available in today's marketplace. These discs are equally at home on the road or at the race track. Outer friction rings are cast from high-carbon G3500 disc alloy, giving excellent wear properties and crack resistance even after heavy on-track use. EBC's patented stainless steel SD-Drive bobbins allow the braking ring to float freely and independently of the centre bell, reducing stresses and eliminating the chance of warping, whilst each bobbin location features an anti-rattle clip for totally silent operation. All discs feature 48 curved vanes and are handed to each side of the car allowing effective heat dissipation. EBC 2-Piece discs often offer a weight saving over OEM parts, helping to reduce the rotational un-sprung mass that has a positive effect on driving dynamics. Additionally, when the disc eventually becomes worn, the hub can be retained replacing only the outer friction ring which reduces long-term operating costs.

WHAT'S IN THE BOX

• 2x Front 2pc Disc set and Yellowstuff pads
  
• 2x Swept grooved rear discs and Yellowstuff rear pads

COMPATIBLE VEHICLES

• Honda Civic Type R | FK8 2.0T K20C1 | 2017+
• Honda Civic Type R | FK2 2.0T K20C1 | 2015-2016

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.

AVAILABILITY

PLEASE CHECK FOR REAR PARTS AVAILABILITY BEFORE ORDERING