Motul RBF 600 factory line brake fluid is a 100% synthetic brake fluid particularly suitable for the demands of racing and for those who require a high-performance brake fluid. The high-performance DOT 4 brake fluid is particularly suitable for race application and exceeds the DOT 5.1 and DOT 3 standards. The very high dry and wet boiling point of RBF 600 is far better than Dot 5.1 brake fluids and enables effective braking even under extreme conditions. RBF 600 brake fluid is suitable for all types of hydraulic actuated brake and clutch systems requiring a non-silicone fluid.

• Dry Boiling Point - 312 degrees Celsius
• Wet boiling point - 216 degrees Celsius
• 500ml 

Extreme High-Performance polyglycol brake fluid. Far exceeds the standards of DOT 4. Each bottle is filled with Nitrogen, increasing shelf life and eliminating contamination while factory sealed. Extremely high dry boiling point 594°F (312°C) helps prevent vapour lock and brake fade during hard use, with excellent recovery time. Wet boiling point 401°F (205°C).

AVAILABILITY

Stock Item

RBF660 is a 100% synthetic racing brake fluid from Motul which meets DOT 4 specifications. It features a very high boiling point which makes it suitable for use in the most extreme racing conditions including heavy and powerful race cars using Carbon or Ceramic brakes.

• Boiling point - 325 Deg C (617 Deg F)
• 500ml Bottle

High-Performance brake fluid with a very high dry boiling point of 617°F (325°C) and wet boiling point of 400°F (204°C). For all types of hydraulic brake and clutch actuators requiring non-silicone synthetic fluid. Specially designed to resist extreme high temperature generated by racing brakes (carbon and ceramic) only allowing a minimal air entrance for brake cooling.

AVAILABILITY

Stock Item

RBF700 is a 100% synthetic racing brake fluid from Motul which meets DOT 4 specifications. It features a very high boiling point which makes it suitable for use in the most extreme racing conditions including heavy and powerful race cars using Carbon or Ceramic brakes.

• Boiling point - 336 Deg C (637 Deg F)
• 500ml Bottle

High-Performance brake fluid with a very high dry boiling point of 637°F (336°C) and wet boiling point of 401°F (205°C). For all types of hydraulic brake and clutch actuators requiring non-silicone synthetic fluid. Specially designed to resist extreme high temperature generated by racing brakes (carbon and ceramic) only allowing a minimal air entrance for brake cooling.

AVAILABILITY

Stock Item

A high-temperature brake fluid with an extremely high dry boiling point of at least 310°C, providing exceptional resistance to vapor locking and good compressibility for improved brake feel.

Brake fluids play a key role in driver experience and vehicle feedback. The Millers Oils motorsport brake fluids maintain their viscosity even at high temperatures and are robust against water absorption to ensure consistent performance.

TECH SPECS

• Dry boiling point of above 310°C in comparison to the 230°C required for standard DOT 4 fluids
• Has the capability to perform at the high braking temperatures found under arduous racing conditions
• Robust against water absorption, improving resistance to vapour lock
• Compatible with DOT 3 & 5.1 brake fluids
• Equilibrium Reflux Boiling Point: Above 310°C
• Wet Equilibrium Boiling Point: Above 194°C
• FMVSS 116: DOT 4
• SAE Viscosity Grade: J1703, J1704
• 500ML

COMPATIBLE VEHICLES

• Universal
  

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire. 

AVAILABILITY

In-stock

Allow 1-3 days for dispatch

Genuine Honda 0W-20 Type 2.0 Synthetic Engine Oil 1 Litre

Premium Honda factory fill oil for use in automobile engines.

New Specification designed to meet Civic Type-R performance requirements

This type 2.0 oil is the recommended type of oil that should be used in the Type-R engine when either topping up or replacing.

If the Honda Genuine 0W-20 Type 2 oil is not available, then any oil which conforms to the technical specification of API SN, ILSAC GF-5, 0W 20 can be used.

AVAILABILITY

In Stock

Performance MTF fluid oil is dedicated for all Honda Manual and Auto-Manual (i-Shift) transmissions.

WHAT'S IN THE BOX

• 0.9L per bottle (2.2-2.6L required for full gearbox service)

COMPATIBLE VEHICLES

• Honda Civic Sport | FK7 1.5T L15B7 | 2017+
• Honda Civic Type R | FK2 2.0T K20C1 | 2015-2016
• Honda Civic Type R | FK8 2.0T K20C1 | 2017+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton.

FAQ

Q. How many litres are required for a full gearbox oil change?
A. 2.2L (2.6L for dry fill)

AVAILABILITY

Stock Item

HONDA Coolant. Honda Pro coolant offers maximum protection against corrosion as well as temperatures down to -36°C, giving perfect protection to all types of metals that are used in all Honda engines and cooling systems. Honda Coolant is pre-mixed and ready to use, do not add water. When replacing or adding coolant, please follow the Honda owner's manual. Drain and flush the cooling system before filling it with new coolant.

COMPATIBLE VEHICLES

• Suitable for all Hondas

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.

AVAILABILITY

IN STOCK

A competition running in oil for testbed running for up to 4 hours. Advanced formulation of high-quality solvent refined mineral oils fortified with special low volatility components and appropriate additive treatment. This 10w40 viscosity grade mineral oil has been carefully formulated to offer an extremely high protection level to new engine components and speed up the bedding-in process.

TECH SPECS

• Formulated to meet the needs of the professional engine builder
• Maximizes power output by optimizing bedding in the process
• Provides full protection of highly stressed components whilst allowing optimum bedding in process for piston rings and bore
• Additive technology enables full load runs for short bursts
• The viscometric selected to ensure that even though the additive system performance is strong the pistons can achieve satisfactory boundary lubrication for bedding purposes
• Suitable for 5 hours testbed running or 500mls/800kms on road
• Optimum oil temperature 85-115°C
• Very low leak down [4%] after controlled testbed running

COMPATIBLE VEHICLES

• Universal
  

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire. 

AVAILABILITY

In stock

Millers Oils TRX Synth is an SAE 75W80 fully synthetic manual transmission oil which has been developed to provide maximum wear protection and increase fuel economy. Gear changes are improved with TRX Synth and it performs well even at high temperatures or with heavy duty use

TECH SPECS

• Suitable for manual transmissions or axles
• Improves the quality of the gear change
• Low friction and reduced drag providing increased performance and improved MPG
• Improves quality of the gear change
  
• Resists the effects of high temperature and heavy-use
• MPG Meets API GL-4 / GL-5
• 1 Litter bottle
  
• 3L Recommended per vehicle

COMPATIBLE VEHICLES

• Vast Vehicle brands
  

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire. 

AVAILABILITY

In-stock

 A fully synthetic Triple Ester NANODRIVE Technology low friction formulation suitable for fast road/street modified engines, race, rally, sprints, and hill climbs. 

TECH SPECS

• Significantly reduced friction (laboratory tests and results show up to 60% friction reduction plus a reduction in wear to a standard engine oil)
• Reduces component wear promoting longer engine life
• Reduced heat production
• Increased power output and torque
• Improved reliability
• Improved energy efficiency
• Superior anti-friction and anti-wear characteristics
• Manufactured to far exceed the requirements of API SM/CF and ACEA A3/B4
• Suitable for operating at 125°C with peak temperatures up to 150°C

COMPATIBLE VEHICLES

• Universal
  

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire. 

AVAILABILITY

In stock

The engine is protected from the thermal load of sports driving while achieving light acceleration.

• Effective against LSPI(Low Speed Pre-Ignition)
  HKS bestseller engine oil series "SUPER OIL" are redesigned by the latest technology; an additive was prescribed and added to the oil to protect the engine against the effects of LSPI (Low Speed Pre-Ignition) which tends to occur to a downsized turbocharged engine.
  Usually, LSPI occurs when low viscosity engine oil is used to a downsized turbocharged engine; however, even high viscosity engine oil is used, if the engine is a high compression and high boost tuned direct injection turbocharged engine, and it is run under severe combustion condition, LSPI may occur. New "HKS SUPER RACING" series are the unprecedented high viscosity engine oil that can protect the engine from LSPI.
• Base Oil is 100% Synthetic Oil
  The base oil to maintain the oil basic performance is 100% Synthetic Oil. The best viscosity and ingredient is selected for each engine specification.

COMPATIBLE VEHICLES

• Turbo charged Engines
  

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.

AVAILABILITY

AMSOIL Synthetic Manual Synchromesh Transmission Fluid is a premium-quality synthetic lubricant designed to surpass the most demanding lubrication requirements of manual transmissions and transaxles where non-extreme-pressure fluids are used. AMSOIL Synthetic Manual Synchromesh Transmission Fluid protects gears and bearings in extreme temperatures. It outperforms conventional oils and delivers outstanding performance from -40°F to 300°F, and it maximizes energy efficiency and resists the effects of heat, oxidation, sludge, and varnish deposits unlike its mineral oil counterparts.

AMSOIL Synthetic Manual Synchromesh Transmission Fluid prevents the thinning effects of mechanical shear for stable viscosity, superior film strength, and excellent anti-wear performance. It protects against corrosion, keeps seals soft for long life, and is compatible with brass synchros for smooth synchromesh shift quality even in cold conditions. Ideal for Many General Motors, Chrysler, Honda, and Other Vehicles AMSOIL Synthetic Manual Synchromesh Transmission Fluid is a higher quality, lower-cost replacement for multiple vehicle manufacturer-branded products. This premium synthetic formulation provides enhanced anti-wear protection and lasts longer in service.

Replaces Honda Genuine MTF fluid for manual transaxles and Texaco MTX fluid. Not for use in engines, hypoid rear axles, limited-slip, or wet-clutch applications. 

TECH SPECS

• Replaces genuine Honda MTF fluid for manual transaxles and Texaco MTX fluid. Not for use in engines, hypoid rear axles, limited-slip, or wet-clutch applications. 
• 5w30
• Recommended for 50,000 miles service intervals or longer (up to 150,000 miles) as indicated in the owner's manual.

WHAT'S IN THE BOX

• 0.9L per bottle (2.2-2.6L required for full gearbox service)

COMPATIBLE VEHICLES

• Honda Civic Sport | FK7 1.5T L15B7 | 2017+
• Honda Civic Type R | FK2 2.0T K20C1 | 2015-2016
• Honda Civic Type R | FK8 2.0T K20C1 | 2017+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton. 

FAQ

Q. How many liters are required for a full gearbox oil change?
A. 2.2L (2.6L for dry fill)

AVAILABILITY

IN STOCK

MoCool is a coolant additive that will reduce the cooling system operating temperature by as much as 15 degrees C (30 degrees F).

This performance additive offers better heat transfer than normal coolants. The unique formula also contains rust and corrosion inhibitors.

Designed to be used with a Pure water at a dilution of 5% (20:1) for competition use where monoethyleneglycol is not allowed. The normal water/coolant mix at 5% of volume. It can be used with all aluminium, cast iron, copper, brass and bronze cooling systems.

500ml

AVAILABILITY

Stock Item

MOTUL AUTO COOL EXPERT -37°C is a long life ready to use cooling liquid, based on monoethylene glycol, using hybrid organic / non organic mix additive technology, named Hybrid Tech. This product can be mixed with all monoethylene glycol based coolants. Recommended for all cooling systems: passenger cars, heavy duty, construction and agriculture vehicles, gardening, ships, stationary engines.

DESCRIPTION

High-performance coolant is released by HKS, the expert of the engine tuning.

“Ultimate Cooling Performance for Winning!!” 

• HKS SUPER Coolant Racing Pro is a racing type coolant that provides excellent cooling performance for your vehicle.
• High anti-foaming, rust & corrosion prevention, withstanding a long duration of usage.
• Usage environment must be considered since the freezing temperature is -1℃.
• Pre-diluted coolant. Just pour straight into the cooling system and you're ready to go!
• Made in JAPAN" - High Quality

TECH SPECS

• Product: Radiator Fluid
• Base: Pure Water
• Component: Rust Preventive Agent & Cooling Agent
• Volume: 4L
• Color: Blue
• Freezing Temperature: -1℃ (Central Value)
• Replacement Interval: 2-3 years

COMPATIBLE VEHICLES

• Universal
  
• FK8 Volume 4.6L
• FK2 Volume 6.7L

AVAILABILITY

In-Stock

Oil filters are designed to filter out metallic powder or other contaminants generated within the oil due to oxidation, such as varnish or sludge, and return clean oil free of contaminants to the engine. If the oil filter becomes blocked and the relief valve remains open, contaminants cannot be removed from the oil and are circulated within the engine, which may result in engine damage.

Performance

UNIQUE DESIGN WITH "IRREGULAR FOLDS”

The filter stores a unique series of folds to increase its surface area, resulting in superior filtration and operating life.

When the engine is stopped, the design of these filters prevents oil from draining from oil channels throughout the engine. This ensures that oil is supplied to required areas as soon as the engine is restarted.

Facts

Honda Genuine Oil Filters are tested for each series of engine and manufactured to provide optimal filtration

AVAILABILITY

2-10 DAYS

Part NO. 15400-RTA-003 MADE IN JAPAN

The Spoon Sports Magnetic Drain Bolt (Engine Only) uses a magnetic bolt to capture any metallic fragments in your engine away from the delicate engine internals.

AVAILABILITY

IN STOCK

DESCRIPTION

Safety

When breathed in, particles smaller than approximately 2 microns are absorbed into the lower respiratory tract and lungs and cannot be expelled by exhaling: they remain as deposits.

Performance

The superiority of Honda Genuine Cabin Filters : 3 layers in comparison with other products. Due to these 3 layers, the Honda Genuine Cabin Filters have been specially designed for each particular model of vehicle to ensure that dust, pollen, and other contaminants cannot flow through to the evaporator via air gaps. Filter types to suit the characteristics of each region are used.

Facts

Designed with a proprietary filter paper with air holes that trap fine dirt and dust (the area of the filter differs with model).

COMPATIBLE VEHICLES

• Honda Civic Type R | FK8 2.0T K20C1 | 2017+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire. 

AVAILABILITY

Stock

DESCRIPTION

K&N Cabin Air Filters replace your vehicle's stock cabin filter with a reusable design that cleans and freshens incoming air. They are electrostatically charged to grab and hold dust particles. K&N cabin air filters help control odours while they help capture most mould, mildew, fungus, spores, bacteria and germs. When they get dirty they can be cleaned and reused and best of all, they come with a 10 year/1,000,000 mile limited warranty.

• Easy to Clean and Reuse
• Freshens and cleans incoming cabin air
• Helps control odours
• Helps capture most mould, mildew, fungus, spores, bacteria, germs, pollen and allergens
• Factory fit - pre-treated and ready to install
• Electrostatically charged to hold dirt and dust
• 10 year/1,000,000 mile limited warranty
  
  

FITTING DETAILS

Direct replacement for a FK8 Type R

FITTING COST/TIME

Cabin Filter 0.1 hr

WHAT’S IN THE BOX

1x K&N Washable Cabin Filter for FK8 Type R

The tuning parts are also evolving with the appearance of spark plugs in consideration of fuel efficiency improvement and environmental performance. The use of spark plugs with an ignition position projecting 2 mm more than usual has been increasing. As you are aware, in sports vehicles such as the new Honda Civic Type R (50001-50003-M45HLZ) and Suzuki Swift Sport, this type of spark plug has also been adopted. More and more cars will use this type of spark plug in the future.

M12 Long Reach High Heat Range Tuning Sparkplug with Protruding Electrode Concept and Features: M12 Long Reach Sparkplug with protruding electrode for such vehicles as Honda Civic Type R and Suzuki Swift Sport. The lineup is equivalent NGK No. 8 and No. 9 heat values, see details. New series of plugs inherits the best from the existing M series and features Ruthenium Electrode to provide a reliable spark for vehicles with increased boost or lightly tuned vehicles. By changing the centre electrode from iridium to ruthenium, it has been possible to increase the ignition and durability more than ever. Ruthenium technology is highly abrasion-resistant to maximize durability and performance to your engine. Provides more complete fuel burn than other precious metal spark plugs, resulting in quicker throttle response, smoother idle and better cold starts. Warning: Use of this spark plugs on a vehicle not compatible with protruding electrode spark plugs may lead to serious engine damage. When replacing sparkplugs, be sure to compare the shape of a new plug with installed and select an appropriate spark plug.

COMPATIBLE VEHICLES

• Ariel Atom 4 | 2.0T K20C1 | 2019+
• Honda Civic Type R | FK2 2.0T K20C1 | 2015-2016
• Honda Civic Type R | FK8 2.0T K20C1 | 2017+
• Honda Civic Type R | FL5 2.0T K20C1 | 2022+

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.

AVAILABILITY

Stock item

Genuine Honda spark plugs 

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire. 

AVAILABILITY

Stock Item

Denso Iridium Tough spark plugs 

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire. 

AVAILABILITY

Stock Item

Genuine high-temperature silicone liquid gasket. This unique formula to Honda is non-acidic and won't corrode aluminium as other silicone gasket products will. For use in areas not requiring solid gaskets. For example when you're replacing water pumps or rocker cover gaskets. Dries quickly, resists vibration, water, and oil, and effective from 75F to 600F. Use only the best.

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.

AVAILABILITY

In stock

DESCRIPTION

Normfest Viro is a powerful anti-bacterial cleaning agent, which when dispersed travels through your entire AC system cleaning and killing harmful bacteria. Easy To use.

• Ideal for quick and easy and hygienic cleaning
  
• Thoroughly removes dead micro-organisms
  
• Helps prevent allergies
  
• Leaves a pleasant fragrance
  
• Box contents are enough for one application
  
• Alcohol-based
  

AVAILABILITY

Stock Item

PMA Air Con sanitizer cleans and refreshes the entire air conditioning system.

TECH SPECS

• Sanitisation Of Entire Air Conditioning System
• Proven To Kill A Broad Range Of Bacteria, Fungus, And Yeasts While Leaving A Pleasant And Long Lasting Aroma
• Suitable For Any Automotive Vehicle With An Air Conditioning System Fitted
• Efficient Cleaning And Sanitising Air Conditioning Sanitiser Aerosol

WHAT'S IN THE BOX

• 1x PMA Air-Con Sanitizer 
  

FITTING DETAILS

Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire. Here are the important things you need to know:

• Shake well before use
• Close all windows
• Start the engine
• Switch on the air conditioning setting to recirculation mode on full power and lowest temperature
• Place aerosol in an upright position in the footwell and away from any obstructions
• Depress the nozzle in the lock position away from yourself
• Exit the vehicle ensuring all doors and windows are closed
• Once the aerosol has emptied allow the air conditioning to run for another 10 minutes
• Open the car door, turn off the engine and allow any fumes to evaporate (normally 30-60 minutes)
• Dispose of can safely
  

AVAILABILITY

In Stock