Our 12 month 12'500 mile service comprises of a full vehicle inspection during which we will
Replace the engine oil and filter using Genuine Honda 0w20 oil and filter.
Visually inspect all suspension, steering, and braking systems along with all underside fuel and brake lines.
Inspect and report Tyre condition wear and pressure
Inspect and report Brake condition and wear
Check and adjust All fluid levels
Check lights and wipers
Check and adjust the handbrake
Test drive Vehicle
Optional pollen filter and anti-bacterial treatment available on all services.
25'000 Mile Second Service 50'000 Mile
Preço normal
€337,95
In addition to carrying out all the work of the first service, we’ll also
Inspect and adjust engine valve clearances
As in the first service, we will
Replace the engine oil and filter using Genuine Honda 0w20 oil and filter.
Visually inspect all suspension, steering, and braking systems along with all underside fuel and brake lines.
Inspect and report Tyre condition, wear and pressures
Inspect and report Brake condition and wear
Check and adjust All fluid levels (except gearbox)
Check lights and wipers
Check and adjust the handbrake
Test drive Vehicle
Optional anti-bacterial treatment is available on all services upon request.
3 Hole Bolt Downpipe Flange Gasket
Preço normal
€10,95
3 Hole Bolt Downpipe Flange Gasket
COMPATIBLE VEHICLES
Honda Civic Type R | FK2 2.0T K20C1 | 2015+
Honda Civic Type R | FK8 2.0T K20C1 | 2017+
FITTING DETAILS
Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.
AVAILABILITY
IN STOCK
37'500 Mile Third Service
Preço normal
€279,95
Your third service is due after your vehicle has covered 37'500 miles or 3 years old.
The third service will again include everything we do in the first service.
In addition to carrying out the work of the first service, we’ll also
Replace brake fluid - optional brake line replacement recommended
- optional Motul fluid upgrade
Air filter replacement - K&N Replacement panel filter fitted as standard
- optional Eventuri filter replacement
As in the first service, we will
Replace the engine oil and filter using Genuine Honda 0w20 oil and filter.
Visually inspect all suspension, steering, and braking systems along with all underside fuel and brake lines.
Inspect and report Tyre condition wear and pressure
Inspect and report Brake condition and wear
Check and adjust All fluid levels
Check lights and wipers
Check and adjust the handbrake
Test drive Vehicle
Optional pollen filter and anti-bacterial treatment available on all services.
4 Piston 2000cc Direct Injection Fuel Injectors | Honda Civic Type R | FK2/FK8 2.0T K20C1 | 2015+
Preço normal
€1.536,95
These high flow fuel injectors are a 85% increase in flow over the OEM fuel injector allowing you to push the limits on horsepower with your Civic Type R, Accord, or other K20C1 powered vehicle without adding the complexity of port injection. Keep your car 100% direct injection only!
Pair this with our high flow fuel pump for 800hp with DI only.
COMPATIBLE VEHICLES
Honda Civic Type R | FK8 2.0T K20C1 | 2017+
FITTING DETAILS
Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.
Please call for more info.
AVAILABILITY
10-15 days
4 Piston Diamond Claw Crank Lock | Honda Civic Type R | FK2/FK8 2.0T K20C1 | 2015+
Preço normal
€101,95
DESCRIPTION
4P Diamond Claw® flywheel surface lock helps to prevent flywheel bolts from backing out of the crankshaft in high rpm applications where vibrations and harmonics often cause welding of the flywheel to the crank. In the event that the flywheel does become loose and start to vibrate against the crank, this surface lock can help to protect the crank and prevent damage.
Diamond Claw® Surface Locks have successfully eliminated fretting (surface welding) in every application they have been used in. With an installed thickness of .008 inch, a Diamond Claw® will not affect driveline alignment. Diamond Claw® locks consist of precisely sized CBN (diamond) particles that are plated onto proprietary fatigue resistant steel. The uniformity of both diamond particle spacing and overall thickness insured complete contact across the entire Diamond Claw® surface. Diamond with an exceptional hardness of 10,000 Vickers are held within a plating matrix of 950 Vickers. This combination of extreme hardness and toughness allow Diamond Claws® to penetrate surfaces hardened to Hrc 65.
COMPATIBLE VEHICLES
Honda Civic Type R | FK2 2.0T K20C1 | 2015+
Honda Civic Type R | FK8 2.0T K20C1 | 2017+
FITTING DETAILS
Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.
Please call for more info.
AVAILABILITY
5-7 working days
4 Piston Head Stud Kit | Honda Civic Type R | 2.0T K20C1
Preço normal
€239,95
Whether you are pushing an additional 100hp or 500hp over stock with your K20C1, optimum cylinder head-to-block sealing is critical. 4P head studs are premium grade 8740 alloy and are precisely manufactured to the highest quality standards. If you plan on turning up the boost and pushing the limits, don't forget this critical part of your build.
COMPATIBLE VEHICLES
Honda Civic Type R | FK2 2.0T K20C1 | 2015+
Honda Civic Type R | FK8 2.0T K20C1 | 2017+
FITTING DETAILS
Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.
Please call for more info.
AVAILABILITY
In stock
4 Piston | 625+ Extreme Duty Head Stud Kit | Honda Civic Type R | 2.0T K20C1
Preço normal
€525,95
These studs are made exclusively for 4 Piston by ARP to be the absolute best for your racing engine. There is no other material on the market better suited for cylinder head clamping. 625+ material is substantially stronger than any entry level 8740 head stud material and substantially stronger than L19. L19 is subject to hydrogen embrittlement and stress corrosion. Even if handled properly during the assembly process, L19 is exposed to condensation inside a running engine. There is nothing you can do to avoid this. Furthermore, 625+ has had a yield strength 17% greater than L19 and 30% greater than 8740.
COMPATIBLE VEHICLES
Honda Civic Type R | FK2 2.0T K20C1 | 2015+
Honda Civic Type R | FK8 2.0T K20C1 | 2017+
FITTING DETAILS
Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.
Please call for more info.
AVAILABILITY
5-10 DAYS
4 Piston | Crank Pulley Bolt
Preço normal
€51,95
Whether you are pushing an additional 100hp or 500hp over stock with your K20C1, optimum cylinder head-to-block sealing is critical. 4P head studs are premium grade 8740 alloy and are precisely manufactured to the highest quality standards. If you plan on turning up the boost and pushing the limits, don't forget this critical part of your build.
COMPATIBLE VEHICLES
Honda Civic Type R | FK2 2.0T K20C1 | 2015+
Honda Civic Type R | FK8 2.0T K20C1 | 2017+
K20, K24, K24Z, F20C, F22C
FITTING DETAILS
Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.
Please call for more info.
AVAILABILITY
3-5 days
4 Piston | Ultra Connecting Rods | Honda Civic Type R | 2.0T K20C1
Preço normal
€1.402,95
4P Forged I-Beam Connecting rods are the finest available for your FK8 Civic Type R or K20C1 engine. These ultra-strong I-beam rods are held to the highest quality standards and feature smooth finish areas to stress points for additional strength. They are not only strong, but they are also reasonably lightweight at 533 grams to relieve stress from the OEM crankshaft and allow additional RPM. These rods are designed to be used up to 1000 hp.
This connecting rod is what you will find in our premium endurance race engines. Pair these with our Wiseco piston for a bulletproof setup.
COMPATIBLE VEHICLES
Honda Civic Type R | FK2 2.0T K20C1 | 2015+
Honda Civic Type R | FK8 2.0T K20C1 | 2017+
FITTING DETAILS
Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.
Please call for more info.
AVAILABILITY
5-20 DAYS
4Piston 1400cc Direct Injection Fuel Injectors | Honda Civic Type R | FK2/FK8 2.0T K20C1 | 2015+
Preço normal
€1.204,95
DESCRIPTION
These high flow fuel injectors are a 25% increase in flow over the OEM fuel injector allowing you to push the limits on horsepower with your Civic Type R, Accord, or other K20C1 powered vehicle without adding the complexity of port injection. Keep your car 100% direct injection only! These injectors can be installed in 30-40 minutes. Pair this with our high flow fuel pump for 500hp with DI only.Jump to 1650cc injector for even more horsepower capability. Not only does this open the door to higher horsepower levels, but it also allows you to do it safely with acceptable air-fuel ratios.
COMPATIBLE VEHICLES
Honda Civic Type R | FK2 2.0T K20C1 | 2015+
Honda Civic Type R | FK8 2.0T K20C1 | 2017+
FITTING DETAILS
Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.
Please call for more info.
AVAILABILITY
Please allow 14 days
62'500 Mile Fifth Service
Preço normal
€187,95
Our 62'500 mile service comprises of a full vehicle inspection during which we will
Replace the engine oil and filter using Genuine Honda 0w20 oil and filter.
Visually inspect all suspension, steering, and braking systems along with all underside fuel and brake lines.
Inspect and report Tyre condition wear and pressure
Inspect and report Brake condition and wear
Check and adjust All fluid levels
Check lights and wipers
Check and adjust the handbrake
Test drive Vehicle
Optional pollen filter and anti-bacterial treatment available on all services.
75'000 Mile Sixth Service
Preço normal
€577,95
ACL RACE Conrod Bearing Set | Honda Civic Type R | FK2/FK8 2.0T K20C1 | 2015+
Preço normal
€65,95
HIGH STRENGTH OVERLAY PLATEwith reduced thickness for improved fatigue properties
HARDENED STEEL BACKSon all rod bearings to improve the support of the bearing lining and assist with bearing retention in the housing.
INCREASED CRUSHfor improved bearing retention
ELIMINATION OF FLASH PLATINGon the back of the bearings to improve heat transfer through the bearings and to maximize the grip between the bearings and its housing.
INCREASED ECCENTRICITYto compensate for bore distortion at high rpm and to assist in the formation of hydrodynamic oil films.
3/4 GROOVED MAIN BEARINGSto optimize bearing load carrying surface area and oil flow to the conrod bearings.
TIGHT CONSISTENT WALL TOLERANCESto help you maintain consistent clearances.
ENLARGED ID CHAMFERSon bearing edges where required to accommodate large fillet radius on performance crankshafts.
Sizes
STD, .025, .25
Oil Clearance
Standard
Half Type
Identical Halves
Material
Tri-metal Hardened steel backs
Min. Std Shaft Size
1.889in / 47.98mm
Max. Std Shaft Size
1.8898in / 48mm
Min. Std Tunnel Size
2.008in / 51.004mm
Max. Std Tunnel Size
2.0088in / 51.024mm
Max Wall at Crown
0.0591in / 1.5mm
Max Overall Length
0.6063in / 15.40mm
Weight
0.12
Notes
0
TECH SPEC
High-performance Trimetal engine bearings
Designed to withstand higher RPM conditions
High strength overlay plate with reduced thickness for improved fatigue properties
WHAT'S IN THE BOX
1x FULL SET
COMPATIBLE VEHICLES
Honda Civic Type R | FK2 2.0T K20C1 | 2015-2016
Honda Civic Type R | FK8 2.0T K20C1 | 2017+
Ariel Atom 4 | 2.0T K20C1 | 2019+
FITTING DETAILS
Dream Automotive offers in-house fitting on all products at our workshop in Luton.
Contact us for more information
AVAILABILITY
Stock Item.
ACL RACE Crankshaft Main Bearing Set | Honda Civic Type R | FK2/FK8 2.0T K20C1 | 2015+
Preço normal
€114,95
DESCRIPTION
Designed to withstand higher RPM conditions, ACL Race Series Engine Bearings are available for many of the popular 4, 6 & 8 cylinder applications and feature:
HIGH STRENGTH OVERLAY PLATEwith reduced thickness for improved fatigue properties
HARDENED STEEL BACKSon all rod bearings to improve the support of the bearing lining and assist with bearing retention in the housing.
INCREASED CRUSHfor improved bearing retention
ELIMINATION OF FLASH PLATINGon the back of the bearings to improve heat transfer through the bearings and to maximize the grip between the bearings and its housing.
INCREASED ECCENTRICITYto compensate for bore distortion at high rpm and to assist in the formation of hydrodynamic oil films.
3/4 GROOVED MAIN BEARINGSto optimize bearing load carrying surface area and oil flow to the conrod bearings.
TIGHT CONSISTENT WALL TOLERANCESto help you maintain consistent clearances.
ENLARGED ID CHAMFERSon bearing edges where required to accommodate large fillet radius on performance crankshafts.
TECH SPEC
High-performance Trimetal engine bearings
Designed to withstand higher RPM conditions
High strength overlay plate with reduced thickness for improved fatigue properties
WHAT'S IN THE BOX
1x FULL SET
COMPATIBLE VEHICLES
Honda Civic Type R | FK2 2.0T K20C1 | 2015-2016
Honda Civic Type R | FK8 2.0T K20C1 | 2017+
Ariel Atom 4 | 2.0T K20C1 | 2019+
FITTING DETAILS
Dream Automotive offers in-house fitting on all products at our workshop in Luton.
Contact us for more information
AVAILABILITY
Stock Item.
Acuity Aluminium Shift Boot Collar for POCO Shift Knobs | Honda
Preço normal
€22,95
This collar is for use with ACUiTY POCO and POCO-Insulated shift knobs only. It is not compatible with any other shift knobs or boot collar accessories.
Customize your POCO or POCO-Insulated shift knob by adding a new, contrasting shift boot collar. This collar is turned from 6061 aluminum and receives a beautiful satin black anodized finish. All markings are laser-etched onto the metal for durability.
The kit also includes 3x lay-flat cable ties to aid in affixing the collar to your shift boot.
TECH SPECS
6061 Aluminum construction
Satin black anodized finish with laser etching
Compatible with all ACUiTY POCO and POCO-Insulated shift knobs
Includes 3x lay-flat zip ties for installation
This collar is compatible with all ACUiTY POCO and POCO-Insulated shift knobs.
