1 4

Paragon | Front Brake Pads | Honda Civic Type R | K20C1 2.0T | 2015+

£167.90 GBP
inkl. MwSt. Versand wird beim Checkout berechnet

Abholung bei Dream Automotive verfügbar

Gewöhnlich fertig in 24 Stunden

Select Compound: P2 | Sport Comfort | Street/Sport Driving

Paragon brake pads offer excellent overall braking performance optimized for a wide range of motorsport, high performance, and sport-driving applications. Manufactured by Winmax Japan, a highly recognized manufacturer with 60 years of experience in manufacturing high performance brake pads, to deliver superior stopping power, excellent modulation and control, durability, reliability, high fade resistance, and consistent performance under high temperature conditions. Race-proven friction materials, perfect match with Paragon rotors to allow confidence at every braking point, lap after lap. Direct OEM replacement. 

***Manufactured by Winmax for Paragon Performance. Made in Japan.***

P2 Ceramic Compound: Street

The P2 “Sport Comfort” compound is designed for street use where balance between performance and street friendliness is emphasized. Minimal brake dust and noise due to its non-metallic material. Improved initial bite, modulation (brake control), and temperature range over stock pads. Higher coefficient of friction for increased stopping power. Excellent pad and rotor life. Works as designed from ambient temperature. Ideal for daily driven vehicles with performance in mind. 

  • Material: Non-metallic
  • Effective temperature range: Ambient - 932°F (500°C)
  • Average Mu: 0.29 ~ 0.32
  • Recommended for street use only
  • Comparable to: Hawk HPS, Project Mu B Spec

P3 Semi-Metallic Compound: Street/Track 

The P3 “Road & Track” compound is an all-round compound ideal for sport driving, autocross, and light track duty while still maintaining street drivability. Low level of brake dust and noise. Good coefficient of friction, initial bite, and temperature range make this compound capable for track conditions. Best modulation and control characteristics among P series compounds. Great choice for occasional track vehicles without the disadvantages of dedicated track pads. Works as designed from ambient temperature. Great rear pad option for those who prefer a more front biased setup with the R5 compound upfront

  • Material: Semi-metallic
  • Effective temperature range: Ambient - 1112°F (600°C)
  • Average Mu: 0.34 ~ 0.37
  • Recommended for street/track use
  • Comparable to: Ferodo DS2500, Endless MXRS & MX72, Project Mu HC+, PFC 97, Hawk HP+, Pagid RS4-2

R5 Metallic Compound: Dedicated Track

The R5 “High Friction Track / Competition” compound is designed as a dedicated track compound. High coefficient of friction provides sufficient stopping power for track and competition conditions. Precise modulation and release characteristics. Highly fade resistant with a wide temperature range. Flatter torque curve compared to the R7 compound, providing consistent and solid braking performance throughout the effective temperature range which boosts the driver’s confidence. Elevated noise and brake dust compared to P2 and P3 compounds. Relatively easy on rotors compared to competitors’ racing pad offerings. Great front pad option for lighter cars, and rear pad option for those who prefer a more front-biased setup with the R7 compound up front.

  • Material: Metallic
  • Effective temperature range: 212°F - 1382°F (100°C  - 750°C)
  • Average Mu: 0.40 ~ 0.43
  • Recommended for track use
  • Comparable to: Endless CC38(ME22) & CC-Rg, Project Mu Racing 777, Ferodo DSUNO & DS3000 , Cobalt XR3 & XR4, Pagid RST3, RS44 & RS19, CL RC6

R7 Metallic Compound: Maximum Friction, Dedicated Track/Race

The R7 “Maximum Friction Track / Competition” compound is a full race compound with a maximum coefficient of friction. With higher stopping power and maximum effective operating temperature, the R7 compound is ideal for advanced high-speed track events, competitions, and heavier cars that require maximum braking performance. Good modulation and release characteristics. Excellent pad and rotor life. Higher fade resistance compared to the R5 compound, with a solid pedal feel throughout the effective temperature range.

  • Material: Metallic
  • Effective temperature range: 212°F - 1562°F (100°C  - 850°C)
  • Average Mu: 0.48 ~ 0.53 
  • Recommended for track use only
  • Comparable to: Endless CC60(N30C), Cobalt XR1 & XR2, Pagid RS29, Ferodo DS3000+

    COMPATIBLE VEHICLES

    • Honda Civic Type R | FK2 K20C1 2.0T | 2015-2016
    • Honda Civic Type R | FK8 K20C1 2.0T | 2017-2021
    • Honda Civic Type R | FL5 K20C1 2.0T | 2023+
    • Mitsubishi EVO 5-10 (CP9A, CT9A, CZ4A) front
    • 04-17 Subaru STI front (GDB / GRF / GVF / VAB) w/ OEM Brembo 4 pot calipers
    • Subaru BRZ Performance Package / Scion FR-S / Toyota 86 (w/ OEM Brembo calipers) front
    • Subaru BRZ tS front
    • 11-12 Audi RS3 (8P) front
    • 09-14 Audi TT RS (8J) front
    • Holden Commodore Redline w/ OEM 4 pot Brembo calipers
    • 03-09 Cadillac CTS-V front
    • Megane 3 RS 250 front
    • Megane 4 RS front
    • 12-13 Mustang Boss 302 front

    FITTING DETAILS

    Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.

    AVAILABILITY

    5-15DAYS

    Subject to the Supplier's availability

    Select Compound: P2 | Sport Comfort | Street/Sport Driving

    Produktinformation