The TinyDash is a compact and powerful display designed to offer customers vital real-time information from their vehicle's electronics.
The palm-sized unit has been designed with simplicity in mind and to ensure users a hassle-free installation process. It requires only one switched 12v supply along with a two-wire CAN bus connection.
The Syvecs 2.4 Inch TinyDash is a compact competitively priced display designed as an easy-to-install and convenient source of vital information from your powertrain control system.
The unit which fits in the palm of your hand has been designed around simplicity and provides all customers and dealers with a no fuss product experience.
Extensive CAN integration
Syvecs is known industry-wide for our OEM/ECU CAN data abilities and the TinyDash is no exception. We have taken our most popular CAN database decoders and placed them within the TinyDash allowing for direct communication to many powertrain CAN buses. This enables users to get information quickly from their vehicle or after-market ECU displayed on the screen without the limitations of the ODBII protocol.
Should a vehicle/ECU not be supported, installers can use our Generic CAN receive and configure their own.
Connectivity
Two low-current PWM outputs are included within the TinyDash. These are user-configurable via our SCAL software. We have even included a Wastegate strategy and Custom PWM strategy to complement them.
Three analogue inputs are also onboard, each with software selectable pull-ups and allow for many standard analogue and temperature sensors. It is even possible to send this sensor data to your engine controller via CAN increasing system I/O, for example a Calibration Switch.
Customisation, Warnings and Alerts
The TinyDash has many customisable display options allowing for tighter integration into existing vehicle colour schemes along with an adjustable backlight which can be controlled via a CAN or an available analogue input.
Users are also able to configure warnings and alerts for temperature, lambda and more.
Intuitive PC Software
Advanced, yet easy-to-use software. Flexible Input and Output functions, Full CAN BUS configuration, Alarm setups, Layout adjustments
Firmware and Software get updated regularly, check out http://www.syvecs.com/forum/ to make sure you have the latest!
The TinyDash is also a boost controller!
Wire in a Map sensor, Cal Switch and a boost solenoid and enjoy our wastegate control strategies from our ECUs with Closed loop PID targeting and Phase/Antiphase control
3 Analogue/Thermistor Inputs (0-5V) with software pull-up
Interfaces
USB C For Updates and Configuration
1 x CAN 2.0B, user programmable
Power Supply
6 to 26V ignition switched supply
Physical
Harwin Datamate Connector
78mm x 50mm x 20mm
High-quality anodised CNC aluminium body and military spec wiring (Tyco Spec44) ensure a rigorous and long-term use
FITTING DETAILS
Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire. Please contact us for more information.
AVAILABILITY
2-10 DAYS
Dream Automotive | Lambda Sensor Extension Cable | Honda Civic Type R | 2.0T K20C1 | 2015+
Regular price
£57.60 GBP
Our Lambda Sensor Extension Cable is perfect for applications where the lambda sensor needs to be relocated due to variations in design on certain decat or sports-cat downpipes.
COMPATIBLE VEHICLES
Honda Civic Type R | FK2 2.0T K20C1 | 2015-2016
Honda Civic Type R | FK8 2.0T K20C1 | 2017-2022
Honda Civic Type R | FL5 2.0T K20C1 | 2023+
FITTING DETAILS
Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.
AVAILABILITY
Stock due in soon
Mishimoto | Ignition Coil | Honda Civic Type R | K20C1 | 2015+
Regular price
£50.76 GBP
The basic requirements for a properly running engine are fuel, air, compression, and spark. Before increasing the power of your 4-cylinder, it is wise to ensure all maintenance is up to date and these processes are performing as intended. A weak spark from your ignition system can result in misfiring under high-load driving and spark blow-out, which hinders performance.
Mishimoto is proud to launch a new lineup of ignition coils, aimed at providing high-quality replacements that can bring your vehicle up to Stage 0 before moving on to horsepower adding modifications. Mishimoto ignition coils are designed and tested to meet or exceed OEM Honda performance standards and are available as a single coil or in a set of four. Once installed with a set of new spark plugs, one can expect a refreshed ignition system with improved engine startup, a smoother idle, and restored performance from your Civic. The primary frame is constructed from extremely robust phenolic resin, ensuring optimal longevity in high-temperature environments. The precision lower boot provides a barrier against moisture entry into the plug well, eliminating chances for spark plug contamination. In addition, Mishimoto coils are pre-lubricated with dielectric grease to prevent corrosion and ensure an optimal connection between the spark plug and coil.
Mishimoto ignition coils are an ideal replacement for worn or defective factory coils. As with all our products, these ignition coils include our signature Mishimoto Lifetime Warranty.
TECH SPECS
Direct fit for 2016-2021 Honda Civic
High-quality replacement coils available in full sets or single units
Designed and tested to meet or exceed OEM Honda performance specifications
Improves engine startup, idle, and restores performance
Refreshes ignition system ensuring strong spark for stock and modified vehicles
Durable rubber boot provides a barrier against moisture, oil, and debris
High-quality phenolic resin outer shell ensures longevity in high-temperature environments
Pre-lubricated boots with dielectric grease ensure optimal corrosion resistance
Mishimoto Lifetime Warranty
COMPATIBLE VEHICLES
Honda Civic Type R | FK2 2.0T K20C1 | 2015-2016
Honda Civic Type R | FK8 2.0T K20C1 | 2017-2022
Honda Civic Type R | FL5 2.0T K20C1 | 2023+
FITTING DETAILS
Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.
AVAILABILITY
3-10 DAYS
Genuine Honda | UK Front License Plate Base Holder | Honda Civic Type R | FK2 2.0T K20C1 | 2015-2016
Regular price
£54.55 GBP
Genuine Honda Front License Plate Base Holder. These plate holders come standard on UK FK8's
As with all genuine Honda parts expect a perfect fit and performance.
COMPATIBLE VEHICLES
Honda Civic Type R | FK8 2.0T K20C1 | 2017-2022
FITTING DETAILS
Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.
AVAILABILITY
1-2 DAYS
Genuine Honda | UK Front License Plate Base Holder | Honda Civic Type R | FK8 2.0T K20C1 | 2017-2022
Regular price
£60.56 GBP
Genuine Honda Front License Plate Base Holder. These plate holders come standard on UK FK8's
As with all genuine Honda parts expect a perfect fit and performance.
COMPATIBLE VEHICLES
Honda Civic Type R | FK8 2.0T K20C1 | 2017-2022
FITTING DETAILS
Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.
AVAILABILITY
1-2 DAYS
Genuine Honda | Main Bearing | K20C1
Regular price
£25.79 GBP
Genuine Honda Upper/Lower Main Bearing for the K20C1 engine used in the Honda Civic Type R FK2, FK8 and FL5.
COMPATIBLE VEHICLES
Honda Civic Type R | FK2 2.0T K20C1 | 2015-2016
Honda Civic Type R | FK8 2.0T K20C1 | 2017-2022
Honda Civic Type R | FL5 2.0T K20C1 | 2023+
FITTING DETAILS
Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.
